As with most directional microphones, the low frequency response of the PL80a microphone varies with the distance from the sound source. Known as “proximity effect”, the bass response of the microphone increases as the working distance to the microphone is reduced. This “bass boost” is only audible when working at distances closer than 6 inches. Using this microphone at distances greater than 6 inches provides minimal coloration from proximity effect. Proximity effect can be used to your advantage when a thin voice is being recorded. As the vocalist decreases their working distance to the microphone, the low frequency content is enhanced. Close- up positioning of the microphone will also reduce the potential for feedback from the sound reinforcement system. When close-talked, the bass-boost provides an increase in overall microphone output level. The mixer gain may be proportionately reduced, resulting in a reduction of the system’s sensitivity to feedback caused by the sound entering the microphone from the loudspeakers. FEATURES: [ EQ-friendly sonic contour [ Highly detailed frequency response [ Supercardioid polar pattern [ Powerful Neodymium magnet structure [ Shock mounted capsule and low handling noise [ Fine mesh Memraflex grille [ Element Type: Dynamic, Neodymium Magnet Structure [ Frequency Response: 80 Hz - 16,000 Hz [ Polar Pattern: Supercardioid [ Sensitivity, Open Circuit [ Voltage, 1 kHz: 2.2 mV/Pa (-53 dBV) [ Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 [ Rated Impedance: 600 ohms [ Microphone Connector: 3-pin, XLR-type [ Finish: Textured black satin handle with Memraflex TM grille [ Dimensions: Length = 7.44” (189.0 mm) [ Width = 2.00” (50.7 mm) [ Shank = 1.01” (25.6 mm) [ Accessories Included: Stand adapter with Euro-thread insert, Soft zippered gig bag [ Net Weight: 11.8 oz (333 g) [ Shipping Weight: 20.7 oz (587 g)
