219,00 €
The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.
The WB98H/C features transformerless preamplifier circuitry, which improves linearity across the full frequency range. The pickup pattern of the Beta 98H/C provides high gain-before-feedback and excellent rejection of unwanted noise. Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.
WB98H/C with 10 ft. cable terminated to 4-Pin Mini-Connector. This wireless version of the Beta98H/C is a versatile solution for high-volume wind, brass or percussion. Gooseneck with clip-on clamp for secure fit and positioning.
FEATURES:
[ Tailored frequency response for studio quality performance
[ Wide dynamic range for use in high SPL environments
[ Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
[ Optional A98D drum mount is unobtrusive and versatile--allows precise positioning of the microphone while holding it firmly in place
[ Compact design reduces stage clutter
[ Detachable cable for easy storage
[ Interchangeable microphone cartridges with different polar patterns are available
[ Legendary Shure quality, ruggedness, and reliability
[ Type: Condenser (electret bias)
[ Frequency Response: 20 to 20,000 Hz (measured at 304.8 mm [1 ft] from a spherical sound source, free field conditions)
[ Polar Pattern: Supercardioid (as supplied), uniform with frequency, symmetrical about axis. Cartridge for cardioid polar pattern also available.
[ Output Level (at 1,000 Hz): Open Circuit Voltage: -59 dBV/Pa* (1 mV) typical *1 Pa = 94 dB SPL
[ Maximum SPL: (20 Hz to 20 kHz, less than 1% THD): 2.5 kilohm load: 160 dB, 1 kilohm load: 156 dB
[ Preamplifier Output Clipping Level: (20 Hz to 20 kHz, less than 1% THD): 2.5 kilohm load: + 6 dBV (2.0 V), 1 kilohm load: + 2 dBV (1.26 V)
[ Dynamic Range (at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load): 125 dB (max SPL minus A-weighted noise)
[ Output Noise: 35 dB SPL, A-weighted
[ Signal-to-Noise Ratio: 59 dB re 94 dB SPL
[ Output Impedance: Rated at 150 ohms (actual), Recommended minimum load impedance: 1 kilohm
[ Hum Pickup: -7.5 dB equivalent SPL in 1 mOe field (60Hz)
[ Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
[ Phantom Power: 48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3.
[ Cable: BETA 98/S: 7.6 m (25 ft) light-weight, two-conductor shielded, TA4F to TA3F mini connectors.
- BETA 98D/S: 4.6 m (15 ft) heavy-duty, two-conductor shielded, TA4F to TA3F mini connectors.
[ Case: Microphone: Matte black enamel brass case and stainless steel inner grille
- Preamplifier: Matte black enamel finished steel
[ Dimensions: Microphone: 11.7 mm X 35.6 mm (0.46 in. X 1.40 in.)
- Preamplifier: 20 mm X 99 mm (0.79 in. X 3.89 in.)
[ Net Weight: Microphone: 12 g (0.4 oz) less cable, Preamplifier: 96 g (3.4 oz)
";
